（E-MAIL:szkongto01@hotmail.com,qq:1251701967)
RGB, MDA, CGA, EGA to VGA Converter
(MODEL KT-809)
KT-809 is based on the old industrial video converter launch of an innovative industrial Video Converter, KT-809 industrial video converter of industrial fully automated operation.
Quick reference for KT-809:
Input
Signal
Type MDA, CGA, EGA, RGB, RGB Sog, RGBS, RGBHV, YPbPr, Mono/Colour
Interface 9 PIN, 3 PIN, 5 PIN, 6 PIN, 7 PIN, 15 PIN, 20 PIN, 24 PIN, 25 PIN, BNC port…
Parameter Analog: 0.5-1.0 / TTL: 0.2-5.0V
75 ohm / 750 ohm
Scanning: Progressive/Interlaced
Output
Singnal Type Standard VGA/SVGA, 800*600/60hz
Interface Standard 15Pin D-SUB
Power DC 5-12V 1.0A / Consumption- 2.0W maximum
Quick reference for KT-809:
Input
Signal
Type MDA, CGA, EGA, RGB, RGB Sog, RGBS, RGBHV, YPbPr, Mono/Colour
Interface 9 PIN, 3 PIN, 5 PIN, 6 PIN, 7 PIN, 15 PIN, 20 PIN, 24 PIN, 25 PIN, BNC port…
Parameter Analog: 0.5-1.0 / TTL: 0.2-5.0V
75 ohm / 750 ohm
Scanning: Progressive/Interlaced
Output
Singnal Type Standard VGA/SVGA, 800*600/60hz
Interface Standard 15Pin D-SUB
Power DC 5-12V 1.0A / Consumption- 2.0W maximum
KT-809 Size:155MM*100*15mm
KT-809 Performance and characteristic
1. MDA, CGA, EGA, RGB, RGB SOG, RGBS,RGB cs, RGBHV, YUV Signal auto scan
(Horizontal Scanning Frequency: 12K-40K, Vertical Scanning Frequency: unconstrained).
2. Vertical Resolution: 160-600 lines, auto scan.
3. Horizontal resolution: unconstrained, auto scan.
4. Supports sync separation, CS composite sync, SOG green sync, YPbPr (SOY) sync.
5. Supports monochrome, Grayscale, color signal input.
(Horizontal Scanning Frequency: 12K-40K, Vertical Scanning Frequency: unconstrained).
2. Vertical Resolution: 160-600 lines, auto scan.
3. Horizontal resolution: unconstrained, auto scan.
4. Supports sync separation, CS composite sync, SOG green sync, YPbPr (SOY) sync.
5. Supports monochrome, Grayscale, color signal input.
Quick reference for KT-809 interface
DC12V: Power Supply, DC 5-12V/1.0A.
VGA OUT: Standard VGA/SVGA,800*600/60hz
15 Pin Video in: 15 Pin D-SUB input
9 Pin Video in: 9 Pin D-SUB input
9 Pin Video in: 9 Pin D-SUB input
MENU: To assess OSD menu.
V: Vertical Scanning Frequency.
H/CS: Horizontal Scanning Frequency, or composite sync.
R/Pr: Red signal, or the color of the PR.
G/Y: Green signal, or chromatic aberration of Y.
B/Pb: Blue signal, or chromatic aberration of Pb.
LED1: Power LED.
9 Pin D-SUB Video In Reference
15 Pin D-SUB Video In Reference
Note:
1=Red, 2=Green, 3=Blue, 13=Horizontal, 14=Vertical
4, 5, 6, 7, 8, 10, 11 = Gnd
KT-809 OSD
1. H_Position: Moves the position of the display area on the screen.
2. Width: adjust the width of the menu.
3. V_Position: Moves the position of the display area on the screen vertically.
4. Higth: Adjust the height of the menu.
5. Phase: Adjust the phase of the menu.
7. Sync: Signal Sync mode: Separate (HV), Composite(S), SOG, SOY.
Automatic recognition of video input sync, or custom of video input sync.
8. Resistance: Input impedance: 75 ohm or 750 ohm.
9. Scanning: Interlaced or Progressive.
10. Exit: Save and Exit.
11. 15 seconds, don't press any key, the menu automatically and exit. (No signal input, the OSD menu will display)
KT-809 Control buttons
1 Menu: To access OSD menu.
2 To adjust the OSD menu.
Using the Screen Adjustment Menu
(OSD: On Screen Display)
(OSD: On Screen Display)
STEP 1
Connected to signal, no display or display color is not correct, adjust the Signal style ( RGB(A) Analog/RGB(D) Digital TTL/YUV).
STEP 2
MVC007can automatically identify the sync signal, if the display distortions that need to manually adjust the sync signal (Separate (HV) / Composite (S) / SOG, SOY ).
STEP 3
If the screen shows elongated, and the overflow to the bottom of the screen, choose the scanning mode adjusted: Progressive, or screen display is still only half of the monitor, choose the scanning mode to adjust to: interlaced.
STEP 4
Adjust the horizontal position, horizontal size, vertical position, vertical size of the item, adjust the monitor to display properly.
STEP 5
Input impedance: Select the correct input impedance.
STEP 6
Adjustment the phase until the display clearly.
STEP 7
Save and exit.
KT-809 Inctroduction
KT-809 supports RGB/CGA/EGA signal converting to VGA signal, which can be fed to
monitor ,CRT monitor ,projector, TV,and many other devices, replacing your old display
with ease. It has clear graph,stable performance,is widely used in digital control CNC
monitor ,industrial monitor ,imported DCS monitor , analytical device, navigation monitor ,
medical device , airport system, railway system, financial device , special monitor , game
arcade, entertainment monitor. KT-809 is highly adaptive to different parameters. It is
the best old monitor replacement solution nowadays.
Specifications:
Supported signal source:RGB SOG(green Sync )
RGB SOB(blue Sync )
RGB SOR(red Sync )
RGBS (composite Sync )
RGBHV ( discrete Sync )
1, support 12k to 40k H video signal ,automatical y recognized, no limitation on V value.
2, support RGB & YPbPr video format.
3, support interlace scan & progressive scan.
4, support vertical resolution from 200 lines to 600 lines,automatical y recognized.
5, Support any kind of horizontal freq,automatical y recognized.
monitor ,CRT monitor ,projector, TV,and many other devices, replacing your old display
with ease. It has clear graph,stable performance,is widely used in digital control CNC
monitor ,industrial monitor ,imported DCS monitor , analytical device, navigation monitor ,
medical device , airport system, railway system, financial device , special monitor , game
arcade, entertainment monitor. KT-809 is highly adaptive to different parameters. It is
the best old monitor replacement solution nowadays.
Specifications:
Supported signal source:RGB SOG(green Sync )
RGB SOB(blue Sync )
RGB SOR(red Sync )
RGBS (composite Sync )
RGBHV ( discrete Sync )
1, support 12k to 40k H video signal ,automatical y recognized, no limitation on V value.
2, support RGB & YPbPr video format.
3, support interlace scan & progressive scan.
4, support vertical resolution from 200 lines to 600 lines,automatical y recognized.
5, Support any kind of horizontal freq,automatical y recognized.
6, support discrete Sync signal , composite Sync signal or Sync signal composite on
video signal, automatical y recognized.
7, output 800*600 V freq 60Hz standard VGA signal or customized resolution.
8,output support: al kinds of LCD display ,CRT monitor ,LCD TV and so on.
Application:
digital control monitor & industrial monitor repalcement. It has been
widely used in industrial ,business , analytical device industrial monitor
products. It is used to replace old devices with special CRT monitor
components. This product is widely used, including: Automatic Control
System for industry,DCS(distributed control system) & special instrument
system, digital control CNC. Soldering robots. Financial ATM device. PCB
board manufacturing device. Airport, Safety X-ray checking device.
video signal, automatical y recognized.
7, output 800*600 V freq 60Hz standard VGA signal or customized resolution.
8,output support: al kinds of LCD display ,CRT monitor ,LCD TV and so on.
Application:
digital control monitor & industrial monitor repalcement. It has been
widely used in industrial ,business , analytical device industrial monitor
products. It is used to replace old devices with special CRT monitor
components. This product is widely used, including: Automatic Control
System for industry,DCS(distributed control system) & special instrument
system, digital control CNC. Soldering robots. Financial ATM device. PCB
board manufacturing device. Airport, Safety X-ray checking device.
KT-809 can convert video signal from RGB signal
(4pin,9pin,7pin,including B/W and so on) to VGA standard signal, which
can be fed into LCD monitor ,CRT monitor ,projector, LCD TV and so on.
Replace old display system. It has clear graphs , stable performance
and is widely used in many fields.
1956, FANUC company stared. They make digital control system & industrial robots.
They have made more than 40 products since 1960s. The digital control equipments they
are producing are F0,F10/F11/F12,F15,F16,F18 series. F00/F100/F110/F120/F150 series
add MMC on F0/F10/F12/F15, that is CNC,PMC,MMC three-in-one CNC. FANUC digital
control systems are famous for their functionalities, reliabilities.
Most of FANUC monitor on FANUC digital control CNC from 1980 to 1990 are very old
and dying. However, there is no support for these old CRT monitors. In order to make
these FANUC CNC to work for a longer time, we must replace these monitors with new
LCD monitors. The following are examples of replacing old FANUC monitor with the help
of our KT-809.
FANUC O-M original monitor (blinks after long time working):
(4pin,9pin,7pin,including B/W and so on) to VGA standard signal, which
can be fed into LCD monitor ,CRT monitor ,projector, LCD TV and so on.
Replace old display system. It has clear graphs , stable performance
and is widely used in many fields.
1956, FANUC company stared. They make digital control system & industrial robots.
They have made more than 40 products since 1960s. The digital control equipments they
are producing are F0,F10/F11/F12,F15,F16,F18 series. F00/F100/F110/F120/F150 series
add MMC on F0/F10/F12/F15, that is CNC,PMC,MMC three-in-one CNC. FANUC digital
control systems are famous for their functionalities, reliabilities.
Most of FANUC monitor on FANUC digital control CNC from 1980 to 1990 are very old
and dying. However, there is no support for these old CRT monitors. In order to make
these FANUC CNC to work for a longer time, we must replace these monitors with new
LCD monitors. The following are examples of replacing old FANUC monitor with the help
of our KT-809.
FANUC O-M original monitor (blinks after long time working):
this can also apply to FANUC monitors :
A61L-0001-0071
A61L-0001-0072
A61L-0001-0076
A61L-0001-0079
A61L-0001-0086
A61L-0001-0090
A61L-0001-0093
A61L-0001-0095
A61L-0001-0077
A61L-0001-0078
A61L-0001-0087
A61L-0001-0074
A61L-0001-0094
A61L-0001-0096
Mvc007 signal types:9pin monitor ,monochrome monitor , B/W monitor ,multi-color
monitor , color monitor ,B NC monitor ,RGB monitor .
MVC007 video converter has been strictly tested and are proved to be able to replace
FANUC O-M monitor , industrial monitor , medical monitor replacement. In the field of
monitor replacement we have got a lot of experience. We have lots of solutions which
you can most probably use in your case. We hope to get your business, make your old
digital control device working as before, saving your time and money.
NUM monitor
NUM company has been doing their business for a long time. For recent 30 years, NUM
machines has been used in many industrial fields.
NUM760
A61L-0001-0087
A61L-0001-0074
A61L-0001-0094
A61L-0001-0096
Mvc007 signal types:9pin monitor ,monochrome monitor , B/W monitor ,multi-color
monitor , color monitor ,B NC monitor ,RGB monitor .
MVC007 video converter has been strictly tested and are proved to be able to replace
FANUC O-M monitor , industrial monitor , medical monitor replacement. In the field of
monitor replacement we have got a lot of experience. We have lots of solutions which
you can most probably use in your case. We hope to get your business, make your old
digital control device working as before, saving your time and money.
NUM monitor
NUM company has been doing their business for a long time. For recent 30 years, NUM
machines has been used in many industrial fields.
NUM760
KT-809 signal input definition:
This NUM monitor wire connections:
NUM signal wire( red wire )<-> KT-809 H( pin 13)
NUM signal wire( yel ow wire )<-> KT-809 V( pin 14)
NUM signal wire( blue wire )<-> KT-809 R,G,B pin (connect to pin 1,2,3)
NUM signal wire(yel ow green wire & white wire )<-> KT-809 GND ( pin 4,5,6,7,8,10,11
one of them), no other wire is needed.
Connect to the new monitor , using KT-809 set to RGBHV, done!
NUM signal wire( red wire )<-> KT-809 H( pin 13)
NUM signal wire( yel ow wire )<-> KT-809 V( pin 14)
NUM signal wire( blue wire )<-> KT-809 R,G,B pin (connect to pin 1,2,3)
NUM signal wire(yel ow green wire & white wire )<-> KT-809 GND ( pin 4,5,6,7,8,10,11
one of them), no other wire is needed.
Connect to the new monitor , using KT-809 set to RGBHV, done!
KT-809 brief introduction :
KT-809 industrial , digital control display signal converter can make NUM signal
source devices' non standard signal source convert to VGA standard signal ,directly
used on LCD monitor ,CRT monitor . KT-809 can perfectly replace your old display with
stable output. It is widely used in many NUM digital control device replacement.
KT-809 signal supported format:(MDA,CGA,EGA,VGA, monochrome, B/W signals
etc. ):
RGBSOG(green Sync )
RGBSOB(blue Sync )
RGBSOR(red Sync )
RGBS (composite Sync )
RGBHV ( discrete Sync )
source devices' non standard signal source convert to VGA standard signal ,directly
used on LCD monitor ,CRT monitor . KT-809 can perfectly replace your old display with
stable output. It is widely used in many NUM digital control device replacement.
KT-809 signal supported format:(MDA,CGA,EGA,VGA, monochrome, B/W signals
etc. ):
RGBSOG(green Sync )
RGBSOB(blue Sync )
RGBSOR(red Sync )
RGBS (composite Sync )
RGBHV ( discrete Sync )
********************Input********************
Signals:MDA,CGA,EGA,RGB,RGB Sog,RGBS,RGBHV,YPbPr
Interface: 5BNC, 9pin,3pin,6pin,14pin,15pin,20pin,25pin
Horizontal Frequency Rate(H):12kHz to 40kHz automatically recognized
Signals:MDA,CGA,EGA,RGB,RGB Sog,RGBS,RGBHV,YPbPr
Interface: 5BNC, 9pin,3pin,6pin,14pin,15pin,20pin,25pin
Horizontal Frequency Rate(H):12kHz to 40kHz automatically recognized
********************Output********************
Supports:D-15pin standard VGA/SVGA,Resolution:800*600/60HZ, 640*480/60hz
Interface: D-Sub 15 PIN standard VGA port
Supports:D-15pin standard VGA/SVGA,Resolution:800*600/60HZ, 640*480/60hz
Interface: D-Sub 15 PIN standard VGA port
********************Power********************
DC 12V 1.0A
DC 12V 1.0A
Note:
1.YPbPr = YUV
2.Input Horizontal Frequency Rate 12kHz to 40kHz automatically recognized.
3.Support RGB/RGBSOG/RGBHV CGA/EGA/MDA and YPbPr
4.Support Interlaced Scanning and Line by Line Scanning.
5.Support Vertical Resolution from line200 to line 600 automatically recognized.
6.Support variable Horizontal Resolution automatically recognized.
7.Support RGBHV (separate sync) ,RGBS (composite sync), automatically recognized
8.Output resolution: 800*600/60Hz standard VGA or custom-resolution.
1.YPbPr = YUV
2.Input Horizontal Frequency Rate 12kHz to 40kHz automatically recognized.
3.Support RGB/RGBSOG/RGBHV CGA/EGA/MDA and YPbPr
4.Support Interlaced Scanning and Line by Line Scanning.
5.Support Vertical Resolution from line200 to line 600 automatically recognized.
6.Support variable Horizontal Resolution automatically recognized.
7.Support RGBHV (separate sync) ,RGBS (composite sync), automatically recognized
8.Output resolution: 800*600/60Hz standard VGA or custom-resolution.
There are many old display from 1980s. For example, MDT1283B Totoku Crt display(9" mono amber crt) on Mazak system series controls. MVC007+LCDs is an equivalent replacement monitor for these old displays, and will physically and electronically work in all Mitsubishi system controls that were originally fitted with the MDT1283B. It will also work for many other systems like: · SMT Monitor Repair&Replacement · Magnetek CRT Display Replacements. · Mazak MDT1283B Monitor Replacement · Fanuc MDT947B-2B Monitor Replacement · Fanuc MDT947B-1A Monitor Replacement · Tatung CD14JDS Monitor Replacement · Tatung CD14JBS Monitor Replacement · Tatung CD14 Monitor Replacement · Heidenhain BE411 Monitor Replacement. · Heidenhain BE211 Monitor Replacement. · Heidenhain BC110B Monitor Replacement. · Mazak HM12-PDB Monitor Replacement · Mazak ME-12PDB Monitor Replacement
Other Applications: SSMT monitors, injection molding machine monitor, CNC monitors, wire cutting display, EGA monitor, CGA display, RGB monitor, SMT liquid crystal display, LCD / CRT. Injection molding machine LCD LCD / CRT monitor, CNC liquid crystal display LCD / CRT, LCD Wire LCD / CRT,EGA liquid crystal display LCD / CRT, CGA LCD LCD / CRT, RGB Liquid Crystal Display LCD / CRT. Industrial LCD monitors, industrial LCD / CRT, Industrial LCD monitors, industrial LCD / CRT.Automatic patch panel display, B super-display monitors. CNC monitors, FANUC (FANUC) displays, Mitsubishi monitor, balance machine monitor, thickness monitor, GPS monitors, car LCD monitor, printer monitor, 9-pin monitor, LCD Bowling, AMF LCD, Brunswick LCD monitors, GPS LCDs, Bowling Scoreboard, bowling counter, bowling LCD screen, RGB switch VGA, RGBS switch VGA, RGBHV switch VGA, CGA transfer VGA, EGA VGA converter switch, RGBS converter, RGB converter, power plant equipment displays, industrial control equipment, displays, industrial displays, DCS display Shanghai million have some of the key words: liquid crystal display CNC machine tools, used to replace domestic early from Japan, Germany, the United States, Switzerland, the Netherlands, South Korea and other countries, the original imported CNC lathes, CNC milling, CNC grinding machines, CNC planer, NC punching, CNC wire cutting, CNC drilling, CNC laser cutting, CNC welding machines or large CNC machining center used in a large number of CRT (cathode ray tube) monitors, the product applied to all early use of CRT monitors for CNC system, typically Japan FANUC (FANUC) company FANUC6, FANUC10, 11,16,18,20,0,16 T, 16M CNC systems such as the display; German SIEMENS (Siemens) company SIEMENS8,810,820,8403,3 T, etc.CNC system; Japan MAZAK (Mazak)'s MAZATROL, MITSUBISHI-QUICKTURU, MAZAK-MPLUS, TPLUS and other systems; Japan OKUMA (Okuma) companies OSP5000, OSP3000, OSP8000, OSP5020 other CNC system; German HEIDENHAIN (Heidenhain) Company TNC407, 410,415,406,425,426,430, etc. CNC system, the Japanese HITACHI-SEIKI (Hitachi Seiki) Company, the Netherlands PHILIPS (Philips) companies, brand CNC system, direct installation process is simple, good effect. FANUC Fanuc, OKUMA Okuma Ao Kema, MITSUBISHI MITSUBISHI, HITACHI Hitachi, SIEMENS Siemens, MAZAK MAZAK, TOSHIBA TOSHIBA, MATSUSHITA Panasonic, PHILIPS Philips and other brands.
Models it can be used for:
Fanuc
A61L-0001-0072
A61L-0001-0074
A61L-0001-0076
A61L-0001-0077
A61L-0001-0078
A61L-0001-0079
A61L-0001-0086
A61L-0001-0087
A61L-0001-0090
A61L-0001-0092
A61L-0001-0093
A61L-0001-0094
A61L-0001-0095
A61L-0001-0096
Mitsubishi
C-3240LP
C3470
C-5470NS
CDT14111B
CDT14148B
MDT1283B-2A
MDT1216
MDT947
MDT947B
MDT947B-1A
MDT947B-2B
MDT962B-1A
Siemens
6FC3988-7AF01
6FC4600-0AR04
6FC4600-0AR50
6FC5103-0AB01
QDM-9WD-110
QDM-9WD-120
QDM-9WD-121
SC-1200 SM0901
576744TA 576745TA
Hitachi
C14C-1472DF
C14C-1472D1F
C-5470YE
CD1472D1M
CD1472D1M-2
CDT14111B
CDT14111B-8A
TX1424AD
C14C-1472DFA
TX1425B
TX1450A
TX1450AE
Toshiba
D9CM-01A
D9MM-11A
D9MR-10A
D9MR-51B
D14CM-01A
D14CM-06A
D15CM-04A
D15CM-06A
GE
44A717111
44A719977
44A719978
44A719979
Matsushita
KF-M7099H
TR-9DD1B
TR-9DK1
TR-9DK1A
TR-9DK1B
TR-9DKYC
TR-9K1B
TX-901AB
TR-120S9C
TX-1204
TX-1204AC
TX-1208AA
TX-1404
TX-1404AB
TX-1424
TX-1424AB
TX-1424AD
TX-1425B
TX-1450AB
TX-1450ABA
TX-1450AB5
TX-1450AE special.
Mazak
C-3240
C-3470
C-5470
8DSP40
26S14O19L
CD1472D1M
CDT-14148B
MDT1283-B
MDT925PS
MDT962B
ME12-PDB
HM12-PDB
Heidenhain
BC110B
BC120
BE211
BE411
Tatung
CD14
CD14JBS
CD14JDS
Totoku
MDT947B-1A
MDT947B-2B
MDT947B-3A
MDT947B-3B
MDT1283B
Magnetek
1051091000
14531400102
14531400107
576744TA
576745TA
579417TA
etc.
CNC Monior replacement RGB,MDA,CGA,EGA to VGA Converter
A61L-0001-0072
A61L-0001-0074
A61L-0001-0076
A61L-0001-0077
A61L-0001-0078
A61L-0001-0079
A61L-0001-0086
A61L-0001-0087
A61L-0001-0090
A61L-0001-0092
A61L-0001-0093
A61L-0001-0094
A61L-0001-0095
A61L-0001-0096
Mitsubishi
C-3240LP
C3470
C-5470NS
CDT14111B
CDT14148B
MDT1283B-2A
MDT1216
MDT947
MDT947B
MDT947B-1A
MDT947B-2B
MDT962B-1A
Siemens
6FC3988-7AF01
6FC4600-0AR04
6FC4600-0AR50
6FC5103-0AB01
QDM-9WD-110
QDM-9WD-120
QDM-9WD-121
SC-1200 SM0901
576744TA 576745TA
Hitachi
C14C-1472DF
C14C-1472D1F
C-5470YE
CD1472D1M
CD1472D1M-2
CDT14111B
CDT14111B-8A
TX1424AD
C14C-1472DFA
TX1425B
TX1450A
TX1450AE
Toshiba
D9CM-01A
D9MM-11A
D9MR-10A
D9MR-51B
D14CM-01A
D14CM-06A
D15CM-04A
D15CM-06A
GE
44A717111
44A719977
44A719978
44A719979
Matsushita
KF-M7099H
TR-9DD1B
TR-9DK1
TR-9DK1A
TR-9DK1B
TR-9DKYC
TR-9K1B
TX-901AB
TR-120S9C
TX-1204
TX-1204AC
TX-1208AA
TX-1404
TX-1404AB
TX-1424
TX-1424AB
TX-1424AD
TX-1425B
TX-1450AB
TX-1450ABA
TX-1450AB5
TX-1450AE special.
Mazak
C-3240
C-3470
C-5470
8DSP40
26S14O19L
CD1472D1M
CDT-14148B
MDT1283-B
MDT925PS
MDT962B
ME12-PDB
HM12-PDB
Heidenhain
BC110B
BC120
BE211
BE411
Tatung
CD14
CD14JBS
CD14JDS
Totoku
MDT947B-1A
MDT947B-2B
MDT947B-3A
MDT947B-3B
MDT1283B
Magnetek
1051091000
14531400102
14531400107
576744TA
576745TA
579417TA
etc.
CNC Monior replacement RGB,MDA,CGA,EGA to VGA Converter
没有评论:
发表评论